| L95-O1
|
Interfaces RS232 and IEEE488.2, printer interface
|
| L95-O3
|
Process signal interface
4 analogue inputs, 4 analogue outputs,4 digital inputs, 4 digital outputs, 1 frequency input
|
| L95-O4
|
Flicker meter acc. to EN61000-4-15
|
| L95-O5
|
Monitoring transients
for transient and nonperiodical signals, incl. memory extension
|
| L95-O6-1
|
Extension of precision range to 500kHz
(delay between U- and I-channel typical 40ns)
|
| L95-O6-2
|
Extension of precision range to 500kHz, increased accuracy by equalised delay between U- and I-channel to 4ns typically,
necessary for measurement at small power factors. Adjustable are all current ranges with the voltage ranges 6V...60V or 130V...600V to 4ns, the other combinations typical 40ns
|
| L95-O7-2
|
Modification of standard-600V-measuring input range
3V channel, ranges 0,025 / 0,05 / 0,1 / 0,2 / 0,4 / 0,8 / 1,5 / 3V
For this modificiation, no precision bandwith extension to 500kHz and no traceable to ISO9000 calibration possible, no KR-L95, KRE-L95 or JKR-L95!
|
| L95-O7-3
|
Modification of standard-600V-measuring range
12V channel, ranges 0,1 / 0,2 / 0,4 / 0,8 / 1,5 / 3 / 6 / 12V
For this modificiation, no precision bandwith extension to 500kHz and no traceable to ISO9000 calibration possible, no KR-L95, KRE-L95 or JKR-L95!
|
| L95-O7-4
|
Modification of standard-600V-measuring input range
60V channel, ranges 0,4 / 0,8 / 1,5 / 3 / 6 / 12 / 25 / 60V
For this modificiation, a precision bandwith extension to 500kHz but no traceable to ISO9000 calibration is possible, no KR-L95, KRE-L95 or JKR-L95!
|
| L95-O7-5
|
Modification of standard-600V-measuring input range
650V channel, ranges 12 /25 /60 /130 /250 /400 /600 /650V ; 3200 Vpk
For this modificiation, a precision bandwith extension to 500kHz and also a traceable to ISO9000 calibration is possible!
|
| L95-O8-1
|
Modification of standard-20A-meas. input to 80mA;
ranges: 0,6 / 1,2 / 2,5 / 5 / 10 / 20 / 40 / 80mA; 500mApk / 1 / 2 / 4Apk
For this modificiation, a precision bandwith extension to 500kHz is possible!
|
| L95-O8-2
|
Modification of standard-20A-meas. input to 1,2A;
ranges 0,01 / 0,02 / 0,04 / 0,08 / 0,15 / 0,3 / 0,6 / 1,2A; 7,5 / 15 / 30 / 60Apk
For this modificiation, a precision bandwith extension to 500kHz and also a traceable to ISO9000 calibration is possible!
|
| L95-O8-3
|
Modification of standard-20A-meas. input to 5A;
ranges 0,04 / 0,08 / 0,15 / 0,3 / 0,6 / 1,2 / 2,5 / 5A; 30 / 60 / 120 / 240Apk
For this modificiation, a precision bandwith extension to 500kHz and also a traceable to ISO9000 calibration is possible!
|
| L95-O9
|
Meas. input sockets at the rear
|
| L95-O10
|
Harmonics up to 99th (max. 10kHz) of U, I, P, Q and S, fundamental 0,1...1200Hz
By selectable integer divider (1...128) a new reference fundamental can be created as to detect interharmonics
|
| L95-O11
|
RAM extension for scope mode (4Mio. samples)
|
| LMG-Control-B
|
Data transfer and visualization software
Basic Version included Display, Plot, Table Function and HARM99 Harmonic analyzing (only for devices with activated option LMG95-O10, L45-O8, L50-O8 HARM99)
The software is useful for LMG95/450/500
OS: Windows 2000, XP, Vista, Windows 7
The basic version is free and on Support CD-ROM, enclosed with LMG95 Support CD-ROM.
|
| LMG-CONTROL-WA
|
Waveform Analysis Module for LMG Control
Additional modul for LMG-CONTROL-BASIC. Recording and analysing of sample values of the LMG. Harmonic analysis up to 1MHz (depending LMG), analysing window and recording of transients
OS: Windows 2000, XP, Vista, Windows 7
|
| LMG-STBY-SW
|
Software for measuring the standby power according IEC/EN62301 (EuP LOT6)
and preparation of documentation conforming to standards.
Requirements:
- LMG95 with shunt LMG-SHxxx(-P)
or
- LMG500 with option L50-O9 (optional with shunt)
Operating system Windows XP, Vista or Windows 7
|
