LMG 95e Firmware 5.159
- For LMG450 the status request in transient mode was improved 2012-01-11 Download
Software and driver
| Software for Power Analyzer | |
|---|---|
|
LMG-CONTROL - Visualization, logging and analysis sofware for LMG95/450/500 (version 2.36, size: 9.82 MB) LMG-CONTROL gives you control over every aspect of your LMG. You can use it to configure your LMG remotely, save and load the LMG's configuration, edit the LMG script, view the measuring values in realtime on a PC, record values to harddisk and export them for further analysis in other applications. (read more) |
|
|
PQA-SOFT (version 1.18, size: 15.52 MB) Software for power net analysis with LMG450/LMG500 |
|
|
TERM-L31 (version 6.65, size: 4.65 MB) Data transfer from LMG310 via GPIB or RS232, version 6.65* |
|
|
TERM-L31-U (version 6.65, size: 599.94 kB) Data transfer from LMG310 via GPIB or RS232, software updater from former versions to version 6.65* |
|
|
TERM-L90 (size: 1.81 MB) Data transfer from LMG90 via GPIB or RS232* |
|
|
ZESVIEW (size: 1.74 MB) Graphical presentation and analysis of recorded data from ZES Power Analyzers* |
|
|
Z318 LAN Driver (size: 2.52 MB) |
|
|
USB Driver / LMG-Z316 Driver (size: 1.50 MB) |
|
*Downloads are demos, activating unrestricted functionality by purchasing a registration key. VISA Driver required (Download from this page) |
|
| Software for Compliance Test Systems | |
|
|
CE-Test 61k Setup (version 1.0329, size: 8.94 MB) Operation and analysis software for harmonics and flicker evaluations software* |
|
|
CE-Test 61k Update (version 1.0329, size: 8.94 MB) Operation and analysis software for harmonics and flicker evaluations software* |
|
|
CE-Test Standby (version 1.05, size: 14.08 MB) Software for determination of standby power* |
| *Download is a demo, activating unrestricted functionality by purchasing a registration key. | |
| Driver for National Instruments™ LabView 8.2 | |
|
The drivers require NI-VISA version 4.0 or higher. If you have completely installed a current version of LabView NI-VISA should already be included. Otherwise it can be downloaded via the link beside from the National Instruments™ website |
|
|
Driver for LMG95 |
|
|
Driver for LMG450 |
|
|
Driver for LMG500 |
|
|
VISA driver for LabVIEW and LabWindows until Windows XP (size: 7.81 MB) |
| Freeware Tools | |
|
|
BMP2PC (size: 2.25 MB) BMP2PC is just intended as a little helper application to improve the versatility of your power meter LMG95, LMG310 and LMG450. Its desired functionality is receiving screen-snapshots via serial RS232-interface and showing them on your computer screen. |
|
|
LMGSED - LMG Script Editor (version 0.57, size: 1.38 MB) The Power Analysers LMG95, LMG450 and LMG500 are containing a mighty script language. With this language, the user is able to calculate any measured values in realtime. The script language not only offers the typical arithmetic operation (i.e. root, logarithm, geometrical functions, a.s.o.), it also provides condition operators for sequential control. With LMGSED, you can write your scripts on the PC and transfer them to the LMG. |
|
|
PCXVIEW - PCX Image Viewer (version 0.60, size: 740.20 kB) ZES ZIMMER® Power Meters save their screen dump pictures in the Paintbrush PXC format. PCX is an image file that uses a simple form of run-length encoding (a type of lossless compression algorithm). If your Windows system doesn't support the PCX image, you should install this program. The PCXVIEW application displays all new PCX file versions, provides copy and paste (to include the pictures in other programs like Microsoft Word) and a zoom function. |
|
|
wxTerm (Terminal for RS232 and GPIB) (size: 853.80 kB) By use of this terminal program you are able to interactively test the programming of your LMG's PC-interfaces (RS232, GPIB and RS232 over USB). |